Pump tube Niro

suitable for B2 Vario and B2 Battery

Order number: 0102-510
Maße (mm): upon request
Info: not suitable for flammable media

Description: The Lutz Pump tube (Niro) is suitable for low viscosity, oil based...more

Close menu

Product information "Pump tube Niro"

Immersion depth: 500 mm
Type of seal: sealless (DL)

Description:

The Lutz Pump tube (Niro) is suitable for low viscosity, oil based lubricants, cold cleaners and softeners. With the suitable Motor it is suitable for medium to large filling quantities. Depending on the requirements, the Pump tube can be operated with the electricMotor B2 Vario or the battery version B2 Battery.

Media examples: Lubricants (oil-based), cold cleaners, softeners
For removing small quantities from hobbocks, canisters and drums
Suitable for Motor B2 Vario and B2 Battery

Properties & advantages

No lubricants and therefore no contamination of the pumped medium
Optimized Drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Seal-less design (DL) conditionally safe to run dry

Technische Produktdaten

Pump station material (material):

Niro (Edelstahl)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

no seals in contact with the medium

Mechanical seal (material):

no seals in contact with the medium

Drive shaft (material):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

density (up to kg/dm³):

1.6

Viscosity (up to mPas):

400

Conveyor wheel shape / drive type:

Axial-flow rotor

Seal type:

Sealless (SL)

Immersion length (mm):

up to 500 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

Type:

Niro 28-R-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Pump tube Niro

suitable for B2 Vario and B2 Battery

Description:

Properties & advantages

Sie brauchen Hilfe?