Eccentric screw pump tube B70V SanitaryPlus, Ex

Preview: Eccentric screw pump tube B70V SanitaryPlus, Ex

Eccentric screw pump tube B70V SanitaryPlus, Ex

for three-phase motors

Order number: 0172-094
Maße (mm): op verzoek
Info: The stator of the pumping unit is made of PTFE (polytetrafluoroethylene)

Description: The B70V SanitaryPlus food pump is a powerful positive displacement pump for...more

Close menu

Product information "Eccentric screw pump tube B70V SanitaryPlus, Ex"

Delivery rate: 12 l/min.
Seals: FPM (fluorocarbon rubber)
Note: The connection to the discharge port of the pumping station is made with a Tri-Clamp connection

Leveringssnelheid: 12 l/min. (explosieveilig)

Description:

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packages. The pump meets the requirements of hygienic design and is certified according to the "3-A Sanitary Standards".

also available in special immersion depths
equipped as standard with a carrying handle and a Motor quick-release fastener
Media examples: liquid foodstuffs and semi-luxury foods, pharmaceutical agents and cosmetic products

Features & Benefits

Threadless, manually releasable quick connectors in the wetted area
Quick and easy disassembly
Simple and fast cleaning
Quick release coupling between Motor and Pump tube
Gentle, low-pulsation product transport
Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-"

Technische Produktdaten

Suitable media:

Jogurt, Dispersionsfarbe, Vaseline, Cremes, Lipgloss, Mascara, Glucose , Fette , Honig , Tomatenmark , Eiscreme, Salben , Lippenstift, Gelee, Gemüsebrei

Pump station material (material):

Edelstahl (1.4404)

Static seal (material):

FPM (fluororubber)

Mechanical seal (material):

SIC, Kohle, EPDM

Drive shaft (material):

Edelstahl (1.4571)

Stator (Werkstoff):

PTFE (Polytetrafluorethylen)

Rotor (Werkstoff):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

Fluid temperature (max °C):

100

Viscosity (up to mPas):

100000

Seal type:

Mechanical seal (MS)

Immersion length (mm):

1100

Immersion tube diameter (up to mm):

Statorgröße:

12.1

Druckstutzen (DN):

Connection:

Tri-Clamp

Certification:

ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), U.S. Pharmacopeial Convention, 3-A Sanitary Standard, Verordnung (EG) 1935/2004

Type:

B70V-H-SR Sanitary Plus

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter