Eccentric screw pump tube B70V-D Industry

for three-phase motors

Order number: 0173-004
Maße (mm): upon request
Info: For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.

Description: The Eccentric screw pump B70V-D 12.1 in the industrial version is a powerful...more

Product information "Eccentric screw pump tube B70V-D Industry"

Delivery rate: 12 l/min.
Drive shaft: Cardan shaft (GW)
Type of seal : Stop bushing
Note: Optionally, stator size 25.2 (0173-254) can be selected to overcome higher delivery heads

Description:

The Eccentric screw pump B70V-D 12.1 in the industrial version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

Cardan shaft versions also available in special immersion depths of 500 - 2000 mm
Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials

Features & Advantages

Uniform volume flow
Easy and fast cleaning
Gentle, low-pulsation product conveying
Low wear
Ideal for mobile use

Technische Produktdaten

Pump station material (material):

Edelstahl (1.4571/1.4404)

Static seal (material):

FPM (fluororubber)

Drive shaft (material):

Edelstahl (1.4571)

Stator (Werkstoff):

PTFE (Polytetrafluorethylen)

Rotor (Werkstoff):

Edelstahl (1.4571)

Stopfbuchse (Werkstoff):

PTFE (Polytetrafluorethylen)

Delivery rate (up to max. l/min)*:

Delivery head (up to max. bar)*:

Fluid temperature (max °C):

140

Viscosity (up to mPas):

30000

Conveyor wheel shape / drive type:

Gelenkwelle (hochviskose Medien)

Seal type:

Stopfbuchse

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Statorgröße:

12.1

Thread (inch) outside:

1 1/2"

Type of drive:

Three phase

Type:

B70V-D

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Eccentric screw pump tube B70V-D Industry

for three-phase motors

Description:

Features & Advantages

Sie brauchen Hilfe?