Flange connection
made of stainless steel for Flow Meter VA10
- Order number: 0208-620
- Maße (mm): op verzoek
- Info: is suitable for hazardous areas
Material: Stainless steel
Connection type: DN 25 / PN 6
Description:
The flange connection is required to be able to connect the Flow Meter VA 10 to a piping system. The connection is conductive and can thus be used in potentially explosive environments.
- Material: Stainless steel
Features & Advantages
- Flange connection: DN 25 / PN 6, DN 32 / PN 6, DN 32 / PN 10, DN 40 / PN 10
| Produktgruppe: | Durchflussmesser |
| Accessories group: | Connections |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter