Cookie preferences
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.
Installation flange
for the Eccentric screw pump B70V Ø 52-54 mm
- Order number: 0170-310
- Maße (mm): upon request
- Info: is suitable for B70V Pump tubes
Description:
The mounting flange is attached to the B70V pump and a mating flange. The...more
Product information "Installation flange"
Description:
The mounting flange is attached to the B70V pump and a mating flange. The flange is welded directly to the Pump tube.
- Material: Stainless steel (1.4571)
Features & Advantages
- DN 80 / PN 10
- according to the standard: DIN 2576
- Pumping station diameter Ø 52-54 mm
Technische Produktdaten
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
| Produktgruppe: | Exzenterschneckenpumpen |
| Accessories group: | Adapter / Foot strainers |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter