Hose connection Tri-Clamp
DN 19
- Order number: 0204-871
- Maße (mm): op verzoek
- Info: When using a B70 eccentric screw pump, an additional DN 50 reducer to DN 32 and a closing clamp are required.
Version: for hose DN 19 (3/4")
Seals: FPM
Info: for double diaphragm pump: 1/2" and 1" Pure
Description:
The Tri-Clamp hose connector is required for connecting the delivery hose to the pump, nozzle, discharge elbow or Tri-Clamp fittings (consisting of hose barb, locking clip and gasket).
- for eccentric screw pumps, barrel pumps or double diaphragm pumps (Pure stainless steel)
Features & Advantages
- Material: stainless steel (1.4404)
- for hoses with nominal diameters DN 19 / DN 25 / DN 32 / DN 38
| Produktgruppe: | Fasspumpen / Containerpumpen, Exzenterschneckenpumpen |
| Accessories group: | Hose connection / Hose clips |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter