Pump tube B200 Niro*

for easily flammable liquids

Order number: 0151-400
Maße (mm): upon request
Info: *Version not available in Japan

Description: The horizontal Pump tube is suitable for emptying highly...more

Close menu

Product information "Pump tube B200 Niro*"

Type of seal: mechanical seal FPM (GLRD FPM)
Version: without Pure
Notice: without Ex-approval

Description:

The horizontal Pump tube is suitable for emptying highly aggressive, thin-bodied, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps.
Depending on the application, different Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources.

Horizontal connection at the bottom run of the container
Pump tube equipped with Lutz original hand wheel
Suitable for emptying alternative fuels, oils, flammable liquids

Features & advantages

Optionally with electric or compressed air drive
Low loss of medium when disconnected
Explosion-proof versions for applications in hazardous areas (Zone 1 and 2)
Easy to dismantle
Low space requirement

Technische Produktdaten

Suitable media:

Desinfektionsmittel, Emulsionen, Pflegemittel, Reinigungsmittel, Pflanzenöle, Säuren, Laugen, Wasser, Lösemittel, Mineralöle

Pump station material (material):

Niro (Edelstahl)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

FPM (fluororubber)

Bearing (material):

Edelkohle

Drive shaft (material):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

244

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

100

density (up to kg/dm³):

2.8

Viscosity (up to mPas):

1000

Conveyor wheel shape / drive type:

Axial-flow rotor

Seal type:

Mechanical seal (MS)

Thread (inch) outside:

1 1/4"

Type:

B200 Niro 41-R-GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter