Hose connection PP
with internal thread connection 1"
- Order number: 0204-438
- Maße (mm): upon request
- Info: can only be used in conjunction with reducing nipple
Material PP
Nominal width DN 19 (3/4")
Note: The hose connection is suitable for 1/2" Double diaphragm pump.
Description:
The hose connector connects the delivery hoses to the Pump tube, the Double diaphragm pumps or the Nozzle. When using a Double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
- special connections are available on request
Features & Advantages
- Nominal width: DN 19
- Material made of PP
| Produktgruppe: | Membranpumpen |
| Accessories group: | Hose connection / Hose clips |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter