Immersion depth: 1000 mm (sealless)
Note: The pump set is supplied without battery and charger.
Description:
The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the removal or transfer of foodstuffs.
- Pump tube equipped with Lutz Original handwheel
Features & advantages
- wear-free, particularly low-noise BLDC motor
- optimized drum emptying
- infinitely variable
- extremely high performance with low weight
- Maintenance without special tools
- Sealing modules of the sealless (DL) pump can be replaced
- long service life
| Pump station material (material): | Niro (Edelstahl) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | no seals in contact with the medium |
| Mechanical seal (material): | no seals in contact with the medium |
| Bearing (material): | ETFE |
| Drive shaft (material): | Edelstahl (1.4571) |
| Delivery rate (up to max. l/min)*: | 91 |
| Delivery rate with Nozzle (up to max. l/min)*: | 50 |
| Delivery head (up to max. mWS)*: | 12,3 |
| Fluid temperature (max °C): | 100 |
| density (up to kg/dm³): | 1.6 |
| Viscosity (up to mPas): | auf Anfrage |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Seal type: | Sealless (SL) |
| Immersion length (mm): | from 1000 mm |
| Immersion tube diameter (up to mm): | 41 |
| Thread (inch) outside: | 1 1/4" |
| Anschluss Tri-Clamp (DN): | 32 |
| Schlauchlänge (mm): | 2000 |
| Connection: | Tri-Clamp |
| Type of drive: | Battery |
| Output (W): | 320 |
| Voltage (V): | 24 |
| Protection type: | IP24 |
| Certification: | FDA-compliant |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
