Drum pump for complete drum drainage - solvents

Preview: Drum pump for complete drum drainage - solvents

Drum pump for complete drum drainage - solvents

for highly flammable hydrocarbons

Order number: 0205-545
Maße (mm): upon request
Info: is suitable for the Ex - area

Description: The drum pump is suitable for thin-bodied, flammable and inflammable liquids...more

Close menu

Product information "Drum pump for complete drum drainage - solvents"

Motor: MD2xL - 1000W, 6 bar, comfort handle (for higher flow rate, viscosity and density)
Immersion depth : 1000 mm (mechanical seal)

Description:

The drum pump is suitable for thin-bodied, flammable and inflammable liquids and hydrocarbons. Perfectly suited for removing or transferring explosive liquids and solvents.

Optionally available with Ex - plug
Pump tube is equipped with Lutz original hand wheel
Suitable for drum emptying of alternative fuels, oils, flammable liquids

Features & Benefits

Optionally with electric or compressed air drive
no lubricants and therefore no contamination of the pumped fluid by lubricants
Optimized drum emptying with a residual quantity of approx. 0,1 litres
No leakage if the pump tube is inclined or moved
Maximum product utilisation at reduced drum cleaning and waste disposal costs
Approved according to ATEX Directive 2014/34/EU, Category 1/2

Technische Produktdaten

Suitable media:

Styrol, Kerosin, Ameisensäure, Essigsäure, Ethanol, Benzin, Butanol, Isopropanol, Methanol, Petroleum, Aceton, Äththylacetat, Butylacetat, Nikotin, Toluol

Pump station material (material):

Niro (Edelstahl)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

FEP ummantelt

Mechanical seal (material):

Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)

Bearing (material):

Edelkohle

Drive shaft (material):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

100

density (up to kg/dm³):

2.8

Operating pressure (max. bar):

lower than 6 bar

Viscosity (up to mPas):

1000

Conveyor wheel shape / drive type:

Radial-flow impeller

Seal type:

Mechanical seal (MS)

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

1 1/4"

Explosion protection:

Yes

Type of drive:

Compressed air

Output (W):

1000

Voltage (V):

230

Frequency (Hz):

Protection type:

IP54

Version:

Komfortgriff

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter