Monitoring module SafetyBox
applicable for Lutz Drum and Container pumps and B200
- Order number: 0208-450
- Maße (mm): upon request
Description:
Dynamic seals should be changed after prescribed operating times. With mobile pumps, it is difficult to monitor the operating time, so that the wear of important components can increase and lead to leakage. The perfect solution to prevent this wear is the monitoring module that detects seal leakage in advance.
- easy installation by attaching a leakage sensor to the connection head of the pumping station
Features & Advantages
- Leaks are detected in advance
- Prevents environmental and health pollution
- Safe operation
- Cost effective solution
- Easy installation, can be retrofitted at any time
- Plug & Play
| Produktgruppe: | Fasspumpen / Containerpumpen |
| Accessories group: | Module / Mains unit |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
