Double diaphragm pump AODD model 1 1/2” non-metallic

Double diaphragm pump AODD model 1 1/2” non-metallic

for plant feedings and large-scale industry

Order number: 5241-310
Maße (mm): A 430 | B 538 | C 263
Info: is not suitable for the Ex-area

Description: The double diaphragm pump is suitable for large scale industry and plant...more

Close menu

Product information "Double diaphragm pump AODD model 1 1/2” non-metallic"

Material: Polyvinylidene fluoride carbon fibre reinforced (PVDF)
Material of diaphragm / check balls / seals: TPV (EPDM-PP) + TFM (PTFE) / PTFE / PTFE
Centre block material: Aluminium (corrosion protection lacquered)

Description of material: EPDM = ethylene propylene diene rubber, FPM = fluorine rubber,
NBR = acrylonitrile butadiene rubber, PP = polypropylene, PTFE = polytetrafluoroethylene,
TPC-ET + TFM (PTFE) = thermoplastic polyester elastomer + modified polytetrafluoroethylene,
TPV (EPDM-PP) = EPDM/PP compound

Description:

The double diaphragm pump is suitable for large scale industry and plant feeding as well as for large flow rates and higher viscosities.

typical applications: Filter press, tank cleaning system, pigment dyes and resins
integrated muffler up to model size AODD 1"
highly resistant TFM (PTFE) diaphragms (modified PTFE)

Features & Benefits

high hydraulic performance
maintenance-optimised design and simple installation
self-priming (even when dry)
reinforced elastomers and thermoplastic diaphragms
absolutely oil-free
non-stalling operation

Technische Produktdaten

Double diaphragm pumps (material):

non - metallic

Housing (material):

Polyvinylidene fluoride carbon fibre reinforced (PVDF)

Centre block (material):

Aluminium (corrosion protection lacquered)

Diaphragms (material):

TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP-Compound + Modifiziertes Polytetrafluorethylen)

Valve ball (material):

PTFE (Polytetrafluorethylen)

Seals (material):

PTFE (polyvinylidene fluoride)

Valve seat (material):

PVDF (polyvinylidene fluoride)

Delivery rate (up to max. l/min)*:

370

Delivery head (up to max. mWS)*:

Solids (max. ø mm):

Fluid temperature (max °C):

Viscosity (up to mPas):

30000

Suction head dry (up to max. mwc*):

4,5

Air pressure (max. bar):

Air pressure start-up (min. bar):

Sound pressure level dB(A):

Displacement per chamber (in cm³):

670

Displacement per chamber (in cm³):

1340

Size:

1 1/2"

Air inlet (inch) inside:

1/2"

Pressure joint (inch) inside:

1 1/2"

Suction joint (inch) inside:

1 1/2"

Explosion protection:

Connection:

Gewinde

Type:

DMP 1 1/2" KNT PVDF/PTFE

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter