Eccentric screw pump tube HD-E-SR in PURE version

Preview: Eccentric screw pump tube HD-E-SR in PURE version

Eccentric screw pump tube HD-E-SR in PURE version

for mineral oils, paints, food and cosmetic products

Order number: 0155-012 + 0155-016
Maße (mm): op verzoek
Info: is suitable for use in a container with a small bunghole

Description: The Eccentric screw pump HD-E-SR in the Pure version transfers the advantages...more

Close menu

Product information "Eccentric screw pump tube HD-E-SR in PURE version"

Version: PURE with FPM seal

Description:

The Eccentric screw pump HD-E-SR in the Pure version transfers the advantages of the Drum pump for viscous media quite simply to the highly viscous range. The positive displacement pump has an easily detachable outer tube, a bearing head with Mechanical seal and a free-running shaft with an eccentric screw as a conveying element - all easy to dismantle and clean. Due to the small outer diameter of the pump tube of max. 41 mm, viscous liquids up to 30,000 mPas can be filled. The Pump tube can be suitably combined with our electric or air motors. Thus the emptying of the liquids is secured and saves important resources.

also available in special immersion depths
Pump tube equipped with Lutz original handwheel
Examples of media: viscous cosmetic products, food and etc.

Features & Advantages

Optional drive by electric or pneumatic motors
Uniform volume flow
Light and versatile due to low motor weight
Continuous, low-pulsation delivery of up to 15 litres/min
Low wear
Easily detachable outer tube

Technische Produktdaten

Pump station material (material):

Edelstahl (1.4571)

Static seal (material):

FPM (fluororubber)

Mechanical seal (material):

Edelstahl, Kohle, EPDM

Drive shaft (material):

Edelstahl (1.4571)

Stator (Werkstoff):

PTFE (Polytetrafluorethylen)

Delivery rate (up to max. l/min)*:

Delivery head (up to max. bar)*:

Fluid temperature (max °C):

100

Viscosity (up to mPas):

30000

Seal type:

Mechanical seal (MS)

Immersion length (mm):

1100

Immersion tube diameter (up to mm):

Druckstutzen (DN):

Connection:

Tri-Clamp

Certification:

FDA-compliant, Verordnung (EG) 1935/2004

Type:

HD-E-SR Pure

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter