Lutz Pumpen | Elektrische Fasspumpe, IBC Pumpe mit Schlauch und Zapfpistole für Öl, Diesel

Preview: Lutz Pumpen | Elektrische Fasspumpe, IBC Pumpe mit Schlauch und Zapfpistole für Öl, Diesel

Pump Set - Mineral oils

for oils and lubricants

Order number: 0205-301
Maße (mm): upon request
Info: When used with diesel and similar liquids, the pump is only suitable at a fluid and ambient temperature < 40°C.

Description: The Pump Set is suitable for low viscosity, aggressive and non-flammable...more

Close menu

Product information "Pump Set - Mineral oils"

Motor: MI 4 - 500W, 230V
Immersion depth: 1000 mm (sealless)

Description:

The Pump Set is suitable for low viscosity, aggressive and non-flammable media. Perfectly suited for the removal or transfer of mineral oils.

Media examples: Diesel, heating oil, hydraulic oil, machine oil and engine oil etc.
Pump tube equipped with Lutz original hand wheel
Suitable for filling or transferring alternative fuels

Features & advantages

Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimized Drum emptying
Universally resistant ETFE shaft bearings
Maintenance without special tools
Seal modules of the seal-less (DL) pump can be replaced

Technische Produktdaten

Suitable media:

Motoröl, Maschinenöl, Hydrauliköl, Heizöl, Diesel (<40°C)

Pump station material (material):

Alu (Aluminium)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

no seals in contact with the medium

Mechanical seal (material):

no seals in contact with the medium

Bearing (material):

ETFE

Drive shaft (material):

Edelstahl (1.4571)

Delivery rate (up to max. l/min)*:

Delivery rate with Nozzle (up to max. l/min)*:

Delivery head (up to max. mWS)*:

Fluid temperature (max °C):

100

density (up to kg/dm³):

1.4

Viscosity (up to mPas):

500

Conveyor wheel shape / drive type:

Radial-flow impeller

Seal type:

Sealless (SL)

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Thread (inch) outside:

1 1/4"

Schlauchlänge (mm):

2000

Type of drive:

Electric

Output (W):

500

Voltage (V):

230

Frequency (Hz):

Protection type:

IP24

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Pump Set - Mineral oils

for oils and lubricants

Description:

Features & advantages

Sie brauchen Hilfe?